The-new-style Gas Fireplace Remote Control Kit, Thermostatic On/Off Remote Control Set for Millivolt Valve System
• Remote control and receiver with AUTO Thermostat or manually Function for Millivolt valve system
• It can Direct replacement for SKYTECH - Ambient -Majestic - Monessen - Vermont Castings Fireplaces and Stoves
• This wireless thermostatic on/off/ remote control system provides a safe, reliable, and user friendly remote control for millivolt valve gas appliances
• This remote control system requires (2) “AAA” and (4) “AA” batteries to power the transmitter and receiver (BATTERIES NOT INCLUDED)
• Attention : This kit does not work with Latching Solenoid gas valve systems please read your fireplace directions for correct application before purchase.
RECEIVER
• Pre-programmed for quick Installation
• Low batterie indication
• Press to open the batterie door, install the • batteries
• From the receiver you can turn On and Off the fireplace by pushing the On/ Off gear.
• To use with the Transmitter push the gear into the Remote position
• Receiver connects to any standard millivolt gas valve system
TRANSMITTER
• Remote control has a Touch Key Press and a yellow backlight for better vision at night
• Remote allows you to turn your gas logs on/off or set the temperature you want
ASSEMBLY
Connect the two terminals to the TH and TH/TP terminals of the millivolt valve
Pairing :
1- From the receiver push the gear into Remote position , led light will flash and the receiver will make a beep sound .
2- Press the power button from the remote , the fireplace will light on ,that means pairing successfully.
(NOTE: if pairing unsuccessful, repeat step 1and 2)
Important Safety Information
• Always check the appliance home owner’s manual for additional information, or warnings regarding accessory installation before connecting this remote control system
• This remote control system is designed for use with a millivolt or 24V gas valve system
• Do not use this remote control system on applications with voltages above 24 Volts AC/DC and 1 amp current
• Do not short (or jumper) across the gas valve terminals to test the remote control installation
• Do not use 2 or more remote control systems in the same area , as they will communicate with each other . This may cause the appliance to not work properly
• NOTE : Due to sensitive temperature monitoring components in the transmitter , allow the transmitter 15 minutes to stabilize the room temperature before accurate room temperature are displayed
Gas Fireplace Remote Control Kit,Thermostatic On/Off Remote Control Set
• Gas fireplace remote control thermostat has a Touch Key Press and a yellow backlight for better vision at night ,Remote allows you to turn your gas logs on/off or set the temperature you want , Receiver connects to any standard millivolt gas valve system
• Attention :This kit does not work with Latching Solenoid gas valve systems please read your fireplace directions for correct application before purchase.
• Includes : Remote - Receiver - Wiring assembly - Plastic wall anchors for the transmitter - Screws
• Pre-programmed for quick Installation simply connect the two terminals to the TH and TH/TP terminals of the millivolt valve.
• Direct replacement for Skytech - Ambient -Majestic - Monessen - Vermont Castings Fireplaces and Stoves
• For time clock settings , press the On button from the remote and then press and hold the Time button on the remote for 3 seconds
• Settings F and C Temperature : Unlock the remote, and then press the On button , then press C/F button
• To activate the child - proof protection : Press the lock button on the remote and the remote will be locked, to release press again .
• Pairing : 1- From the receiver push the gear into Remote position , led light will flash and the receiver will make a beep sound .2- Press the power button from the remote , the fireplace will light on ,that means pairing successfully.(NOTE: if pairing unsuccessful, repeat step 1and 2)